Balcrank Fusion 3110-027 Скачать руководство пользователя страница 17

Страница: 17 / 60

The Dispense Keypads are responsible for the communication with the RF meters. The user starts a work

order from the keypad. After the dispense operation has been completed the keypad will receive the actual

amount dispensed from the meter. The Dispense Keypad then sends the dispense results to the Master

Keypad�

The system can handle up to 36 Dispense Keypads. Up to 24 meters can be assigned to each keypad but

each meter can only be assigned to one Dispense Keypad.

System Version

V3.00 2.4 GHz

The standard screen shows the system software version

number. The display will alternate between the standard

screen and the Enter Pin Number screen. The Enter Pin

Number screen is used to access the supervisor menus.

Enter Pin No.

- - - -

NOTE

: An “N” displayed in the lower left-hand corner of the

system version screen indicates a Radio Network error� See

“Radio Status” on page 23 to check the source of the error.

Settings Overview / Supervisor Menus

The following configuration options are only available at the Dispense Keypad.
The default value for the Supervisor PIN is 0001.

V3.00 2.4 GHz

Dispense Keypad

V3.00 2.4 GHz

NOTE

: An “M” displayed in the lower left-hand corner of the

system version screen indicates that the Dispense Keypad

has joined an RF network, but cannot currently contact the

Master Keypad for WO authorization.

NOTE

: An “O” displayed in the lower left-hand corner of the

system version screen indicates that the Dispense Keypad

is in System Override mode. See “System Override (SYS)

Menu” on page 24 for details.

Enter a user PIN to start a work order or the supervisor PIN

to enter the supervisor menus (the default PIN is 0001).

Содержание Fusion 3110-027





























































Результаты поиска

Содержание Fusion 3110-027

Отзывы:

Похожие инструкции для Fusion 3110-027

Бренды по названию

Популярные бренды

Balcrank Fusion 3110-027, Сервисный бюллетень

Результаты поиска

Содержание Fusion 3110-027

Отзывы:

Похожие инструкции для Fusion 3110-027

Бренды по названию

Популярные бренды