C.4 Entering the user program using PanaView
NOTE:
Be sure to record all the programming data entered
in this chapter in
Appendix B. Data records on page 45
.
Programming of the status, system, and pipe submenus
of the channel menu and the global-system menu are
required for basic operation of the XGF868i. Failure to
accurately enter all of the necessary information will result
in unreliable flow rate data. Therefore, be sure to complete
at least the sections of this chapter pertaining to those
three submenus. Except for those three submenus, it is
not necessary to program the XGF868i flowmeter in any
particular order.
Therefore, the sections of this chapter need not be
completed in sequence. Enter the user program as
described below and proceed immediately to any section
of interest.
To begin entering data into the XGF868i via PanaView:
1. From the meter tree in the
new meter browser
(see
), click on the XGF entry. The
screen now appears similar to
Figure 39
below.
Figure 39: Meter tree with edit functions option
2. Expand the
edit functions
option. The window now
appears similar to that shown in
Figure 40: Menus in the edit functions option
3. To enter data into the user program, double-click on
the
site edit
menu. The window appears similar to
Figure 41
below.
Figure 41: Site edit menu window
4. To enter the channel 1, channel 2, or global menu,
highlight and double-click on the desired menu in the
left pane. For example, clicking on channel 1 in
Figure 41
above opens the list of options shown in the center pane.
5. To enter a particular option:
a. Highlight and double-click on the desired option
in the center pane.
shows
the first entry (transducer number) in the
pipe
parameters
option. The title above the center pane
lists the current entry, while the center pane displays
the available selections for that entry.
b. Click on the desired choice. If the entry requires a
numeric or text value, change the value displayed in
the right pane.
55
Содержание DigitalFlow XGF868i
