Baker Hughes DigitalFlow XGF868i, Руководство по программированию

Страница: 14 / 100

1.5.3 Selecting totalizer units
1. Scroll to the desired totalizer units for a totalized
flow rate display and press [enter]. Table 1 on page 3
lists available units.
2. Scroll to the desired number of tot decimal digits
(digits to the right of the decimal point in the
totalized flow rate display) and press [enter].
3. Do one of the following:
• If MASS FLOW is ON, proceed to selecting the
mass flow units on the following page.
• If MASS FLOW is OFF, the meter returns to the
channel program . Go to procedure options
on the next page.
NOTE: Refer to Activating mass flow on page 11 .
1.5.4 Selecting mass flow units
1. Scroll to the desired mass flow units for the flow rate
display and press [enter]. The available units for this
prompt are determined by the selection made at
system units (see Table 2 below).
Table 2: Available mass flow units
English Metric
Pounds Kilograms
Thousands of LB Metric tons (1,000 KG)
Millions of LB
Tons (2,000 LB)
2. Scroll to the desired mass flow time units for the
mass flow rate display and press [enter].
3. Scroll to the desired number of Mdot decimal digits
(digits to the right of the decimal point in the
mass flow rate display) and press [enter].
4. Scroll to the desired mass (totalizer) units for the
totalized mass flow rate display and press [enter].
The available units for this prompt are determined
by the selection made at the system units prompt.
5. Scroll to the desired number of mass decimal digits
(digits to the right of the decimal point in the totalized
mass flow rate display) and press [enter].
Procedure options
After completing the steps on the previous page, the
XGF868i returns to the channel program window.
Do one of the following:
• To continue entering “quick startup” data, continue
to step 1 in Entering transducer and pipe parameters on
page 5 .
• To continue regular programming, refer to
Appendix A. Menu Maps on page 39 , to navigate
to the desired menu.
• To leave the keypad program , press [escape] twice.
4