Azbil F4Q, Руководство пользователя

Страница: 63 / 76

6-17
Chapter 6. Communication Data
Item Data range
/ [unit]
Data address
Decimal
(hexadecimal)
R W Notes
(P-15)
SP ramp control slope 1
0 to 9999 2215 (08A7) ✓ ✓ Specifies the change in flow rate per
second.
Note: The unit for the setting varies
depending on the model.
F4Q9200/9500: × 0.1 mL/min
F4Q0002/0005: × 0.001 L/min
F4Q0020/0050: × 0.01 L/min
F4Q0200/0500: × 0.1 L/min
(P-16)
SP ramp control slope 2
0 to 9999 2216 (08A8) ✓ ✓
(P-17)
Analog scaling 1
(10 to 100 % FS)*
2
2217 (08A9) ✓ ✓ The value is without a decimal
point.*
1
(P-18)
Cumulative flow event
setting (last digits)
0 to 9999 or 0 to 0xFFFF
(see the notes on the
right)
2218 (08AA)
Note: Address
1601 is also
used.
✓ ✓
The method for combining
upper and lower digits/bits and
the data range depend on the
setting of C-47, Totalized flow rate
communication data format.*
3
The value is without a decimal
point.*
4
(P-19)
Cumulative flow event
setting (first digits)
Same as above 2219 (08AB)
Note: Address
1602 is also
used.
✓ ✓
(P-20)
PV fluctuation control
delay time when fully
closed
0 to 9999 [× 0.1 s] 2220 (08AC) ✓ ✓
(P-21)
SP upper limit flow rate
(0 to 100 % FS)*
2
2221 (08AD) ✓ ✓ The value is without a decimal
point.*
1
(P-22)
SP lower limit flow rate
(0 to 100 % FS)*
2
2222 (08AE)
✓ ✓
(P-23)
Primary pressure
specification
[kPa (gauge)] 2223 (08AF)
✓ ✓
(P-24)
Undefined
Always 0 2224 (08B0) – – Returns “0” when the setting is read
and returns a normal response when
written.
(P-25)
Undefined
Always 0 2225 (08B1) – – Returns “0” when the setting is read
and returns a normal response when
written.
(P-26)
Low flow cutoff
threshold
0 to 9999 [× 0.01 %] 2226 (08B2)
✓ ✓
(P-27)
Valve manipulated
variable when error
occurs
0 to 100 [%] 2227 (08B3)
✓ ✓
This MV applies when “4” (Fixed
valve MV) is set for C-16, Operational
mode at error occurrence.
(P-28)
Digital output 3 delay
time
0 to 9999 [× 0.1 s] 2228 (08B4)
✓ ✓