Avery Dennison Monarch Tabletop Printer 2, Справочное руководство

Страница: 14 / 206

1-4 Packet Reference Manual Classification: Avery Dennison – Public
D e t e r m i ni ng t h e P r i n t A r e a
The “bottom ” (or leading edge) is the edge that exits the printer firs t. The 0,0 point is at the
bottom left c orner of the label. The print area is c enter jus tified.
Unit of
M e asure M ax. Supply
(Wid x Le n) M ax. Print Are a
(Wid x Le n) M in. Supply
(Wid x Le n) M in. Print Are a
(Wid x Le n)
Englis h 432 x 1750 409 x 1600 75 x 32 75 x 32
Metric 1080 x 4445 1038 x 4064 191 x 81 191 x 81
Dots (203) 877 x 3553 832 x 3248 152 x 65 152 x 65
Dots (300) 1296 x 3750 1248 x 3600 225 x 96 225 x 96
Longer im ages c an be c reated by realloc ating m em ory to inc reas e the im age buffer. See
"
Defining the Mem ory Configuration Pac ket " in Chapter 2 for m ore inform ation.
Non-Print Zones
The following non-print z ones are rec om m ended
Left and Right 0.025 inc hes (0.6m m or 5 dots ) on either edge of the label.
Top and Bottom 0.025 inc hes (0.6m m or 5 dots ) on the leading and trailing edge of the label.
The leading edge is the edge of the label that exits the printer firs t; the trailing edge is the edge
of the label that exits the printer las t; regardles s of how the form at is des igned on the label.
Us e the following form ulas to c onvert inc hes to dots and m etric :
Do ts = inche s x 2 0 3 (o r 3 0 0 do ts pe r inch)
M e tric (1 /1 0 mm) = inche s x 2 5 4
Eng lis h (1 /1 0 0 inch) = 1 0 0 x (do ts /2 0 3) o r (do ts /3 0 0)
Do ts = M e tric (1 /1 0 mm) x 7 9 9 /1 0 00 (o r 1 1 8 1 /1 0 00)
3 0 0 dpi de pe nds o n the printe r.
Using Supply Layout Grids
A s upply layout grid c ontains m eas urem ent m arkers .
Thes e m arkers help ac c urately pos ition inform ation
on the label.
Dec ide whether to des ign form ats us ing Englis h, Metric ,
or Dot m eas urem ents . Choos e from the following grids :
Englis h The Englis h grid is m eas ured in 1/100 inc hes .
Metric The Metric grid is m eas ured in 1/10 m illim eters
(m m ).
Graphic The printer us es dots to print im ages on a label.
The printhead has 203 dots per inc h (dpi) or an
optional 300 dots per inc h printhead.
Choos e Englis h or Metric units when des igning form ats
to us e with different printers . Englis h or Metric units
allow m ore direc t us e of form ats on printers with
different dens ity printheads .
Supply layout grids are in Appendix D, “ Form at Des ign
Tools .”