Avaya programming and use Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 468

Avaya programming and use Скачать руководство пользователя страница 52

PARTNER

®

Advanced Communications System Installation, Programming, and Use

The T1 Module

2-20

f.

Click the OK button.

The translation you retrieved in displayed in the PARTNER ACS R6.0 PC Administration
workspace as a read-only file.

4.

Save this file as a new file.

a.

Select Save As from the File menu.

The Save As dialog box appears.

b.

Enter the name for the file, and click the Save button.

5.

Verify that the PARTNER system has a T1 module.

a.

In the PARTNER ACS System window, click on System.

The System Components window appears.

b.

Click the General Parameters button.

The General Parameters window appears.

c.

From the System Mode box in the System Identification area, verify that Loop Start Lines
and a T1 module is selected.

6.

Configure the settings for the T1 module.

a.

In the PARTNER ACS System window, click on System.

The System Components window appears.

b.

Click the T1 Parameters button.

The T1 Parameters window appears.

c.

From the Clock Type box, set whether the T1 service provider (Loop) or the PARTNER T1
module (Local) will provide the clock source.

d.

From the CSU Activation box, set whether the PARTNER T1 module will provide CSU
functionality.

e.

From the Framing Type box, set the framing type.

f.

From the Line Encoding box, set the line encoding.

g.

From the Transmit Line Build Out box, set the transmit line build out parameter to match
the signal level and the transmission line. This setting is enabled only when CSU
Activation is set to “Enabled.”

h.

From the Line Equalization Transmission Length box, set the line equalization length to
match the signal level and the transmission line. This setting is enabled only when CSU
Activation is set to “Disabled.”

7.

Administer the settings for each line (channel) you will use on the T1 module.

a.

In the PARTNER ACS System window, click on Lines.

The Lines window appears.

b.

Double-click on the T1 line you want to program. Lines 4 - 19 are T1 lines.

The Line window appears for the selected line.

«
...
50
51
52
53
54
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов