Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 273 / 468

Programming & Using Telephone Features
Direct Line Pickup Features
8-35
Direct Line Pickup—Idle Line (I8LL)
8
Use this feature to access a specific outside line (where
LL
is a system line number) when the line
is not in use. This feature is useful for accessing a line that is not assigned to the telephone.
Considerations
8
■
This procedure applies to individual lines. If you have a pooled extension and you want to
access lines in pools that are not assigned to your extension, dial the pool access code at the
intercom dial tone.
■
If a line is in use, you cannot access it with this feature (you hear busy tone). For information
about accessing a ringing or held call, or joining a call in progress, see
“Direct Line Pickup—
Active Line (I68LL)” on page 8-33 .
■
If Line Access Restriction or Pool Access Restriction is set to No Access or In Only for a
line assigned to an extension or lines within a pool, a user at the restricted extension hears
busy tone if Direct Line Pickup is used to access that line to place a call.
Programming
8
To program a Direct Line Pickup—Idle Line button:
1. Press
f00
.
2. Press a programmable button.
3. Press left
i8
.
4. Program another button for this extension, or exit programming mode.
Using Direct Line Pickup—Idle Line on a System
Telephone
8
To use Direct Line Pickup—Idle Line on a system telephone:
1. If you want, lift the handset.
2. Do one of the following:
■
Press the programmed button and dial the two-digit system line number of the idle line you
want to access
■
Press
i8
and the two-digit line number.
If you did not lift the handset, the speaker comes on automatically.