Avaya programming and use Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 468

Avaya programming and use Скачать руководство пользователя страница 139

Programming System Options

Hold Disconnect Time (#203)

4-41

5.

Do one of the following:

■

To assign or unassign another extension, press

n

or

p

until the extension

number appears on the display. Then repeat Step 4.

■

To program another group, press

N

+

P

and enter a new group

number. Then repeat Steps 3 and 4.

6.

Select another procedure, or exit programming mode.

Hold Disconnect Time (#203)

4

Use this feature to change the hold disconnect time for an outside line (this feature is not available
for the Hong Kong Release 3.0 version). When a caller on hold hangs up, the local telephone
company may send a special signal to the system to free the line. Different telephone companies
use different length signals. The length of the signal is called the hold disconnect time. If you place
a call on hold and the caller hangs up, but the call does not disconnect within a minute after the
caller hangs up, the hold disconnect time is probably set too high, or set at No Detection.

Considerations

4

■

If the telephone company does not send a signal, keep the hold disconnect time set to 450
msec, the factory setting. The user must disconnect a held call manually by retrieving the call
and then hanging it up.

■

Shorten the hold disconnect time only if abandoned calls on hold do not disconnect.

■

Lengthen the hold disconnect time only if calls are being disconnected prematurely.

■

Using Set administration, you can program and view the hold disconnect time for analog lines
only. You must use the PARTNER ACS R6.0 PC Administration software to program and view
the hold disconnect time for lines on the T1 module.

■

The range of values for the hold disconnect time is different for lines on the T1 module. For
these lines, the values are No Detection, or 10 to 2400 msec. in 20 msec. increments. The
default setting is 300 msec. See the PARTNER ACS R6.0 PC Administration software for
more information.

Programming

4

To change the hold disconnect time for a non-T1 line:

1.

Press

f00ss#203

at extension 10 or 11.

2.

At the

Line

: prompt, enter the two-digit number of the line for which you are adjusting the hold

disconnect time.

The current hold disconnect time for the line number you specified is displayed. For example,
if line 1 is set to the factory setting,

09-450

msec

appears on the display.

«
...
137
138
139
140
141
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов