Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 189 / 468

Using the Telephones
Single-Line Telephones
6-11
Dial Tones
6
Single-line telephones have two different dial tones:
■
Outside dial tone is generated by your local telephone company to indicate that you are
connected with an outside line.
■
Intercom dial tone is generated by the system to indicate that you are connected with an
inside line. You hear this dial tone when you are making an inside or intercom call.
To hear the difference between the two dial tones, lift the handset. The dial tone you hear
(assuming the telephone is set to select intercom first, as recommended) is an intercom dial tone.
To hear an outside dial tone, press
9
.
Using the Switchhook
6
Some of the instructions in this guide direct you to “rapidly press and release the switchhook.”
Pressing the switchhook for 1/2 to 1 second sends a signal over the line called a switchhook flash.
However, do not press the switchhook too quickly. If you press the switchhook and nothing
happens, try again and press it a little longer.
If you use the system with PBX or Centrex lines, the PBX/Centrex distinctive ringing
patterns are not passed to telephones. Telephones use the ringing patterns
described here instead.
If your feature telephone has a button labeled “Recall” or “Flash,” use the button instead
of pressing the switchhook. If you use the system with PBX or Centrex lines, your PBX or
Centrex documentation may tell you to press the switchhook to access PBX or Centrex
features. Use the Recall feature instead.