Avaya programming and use Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 468

Avaya programming and use Скачать руководство пользователя страница 104

PARTNER

®

Advanced Communications System Installation, Programming, and Use

Backup and Restore

4-6

Backup Programming—Manual (#124)

4

Use this feature to manually back up all the programming (except the system date, day, and time)
to a Backup/Restore PC Card.

Programming

4

To begin a manual backup of system settings:

1.

Verify that only one Backup/Restore Card is in the processor module.

2.

Press

f00ss#124

at extension 10 or 11.

If there is a problem, one of the following messages appears (see

“Troubleshooting”

for explanations and corrective actions):

■

Card is Write Protected

■

Insert Valid Card

■

SystemBusy

If there is no problem, the display instructs you to press Enter to begin the backup.

3.

Press

e

.

A status message is displayed indicating that a backup is in progress, and within 30 seconds,
a message appears indicating the result.

If the backup was successful, the new backup information replaces the information in the old
MAN.mmddyy file on the Backup/Restore PC Card, and the mmddyy extension now reflects
the current date. Backup information created during a manual backup does not overwrite any
AUTO.mmddyy file.

If the backup failed, you see one of the following error messages (see

“Troubleshooting”

for explanations and corrective actions):

■

Backup Failed:Check Card

■

Backup Failed:SystemBusy

4.

Exit programming mode.

If you exit the procedure before the backup finishes, you do not interrupt the backup,
but you do not see feedback messages on the display.

«
...
102
103
104
105
106
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов