Avaya programming and use Скачать руководство пользователя страница 361 | Manualshive

Страница: 361 / 468

Avaya programming and use Скачать руководство пользователя страница 361

Using Auxiliary Equipment

Voice Messaging Systems

9-45

■

Users with Automatic VMS Cover turned on can activate Do Not Disturb to Send All Calls
immediately to their voice mailbox.

■

If an extension has Automatic VMS Cover and Call Coverage active, calls ring at the
covering extension after the specified number of Call Coverage Rings (#116) or (#320). If the
covering extension does not answer, the call is routed to the voice mailbox of the extension
that activated Call Coverage after the specified amount of VMS Cover Rings.

■

If an extension has Automatic VMS Cover and Call Forwarding active, calls ring at the
forwarding destination; they are not covered by the voice messaging system.

Programming for Automatic VMS Cover

To change the Automatic VMS Cover setting for an extension:

1.

Press

f00ss#310

at extension 10 or 11.

2.

Enter the number of the extension to be covered by the voice messaging system.

3.

To assign or unassign Automatic VMS Cover, press

D

until the appropriate value

appears.

■

1 = Assigned

■

2 = Not Assigned (the factory setting)

4.

To program another extension, press

n

or

p

until the extension number appears

on the display. Then repeat Step 3.

5.

Select another procedure, or exit programming mode.

VMS Cover Rings (321#)

9

Use this feature to define the number of times a call rings before it is sent to a user’s voice
mailbox. Use VMS Cover Rings (#117) for Release 2.0 or earlier systems to program the number
of rings for all extensions programmed for VMS Cover. Use VMS Cover Rings (#321) for Release
3.0 and later systems to program the number of rings on a per-extension basis.

Considerations

9

■

VMS Cover Rings also applies to lines that have been designated an owner with Line
Coverage Extension (#208).

■

If an extension has VMS Cover (F15) or Automatic VMS Cover (#310) active, unanswered
calls to that extension are routed to the voice messaging system after the specified number of
VMS Cover Rings.

«
...
359
360
361
362
363
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов