Avaya programming and use Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 468

Avaya programming and use Скачать руководство пользователя страница 36

PARTNER

®

Advanced Communications System Installation, Programming, and Use

Installing the Control Unit

2-4

Installing the Control Unit

2

The stand-alone processor module or a carrier and its modules are referred to as the control unit.
The control unit must always be wall-mounted.

WARNING:

There are no customer-serviceable components inside the system modules or carrier. There
are hazardous voltages within that can cause severe or fatal personal injury. DO NOT OPEN
MODULES.

Wall-Mounting the Control Unit

2

Before installing the system, be sure you read the safety instructions in the front of this
guide.

To install the control unit, you must do the following:

■

Wall-mount the control unit.

■

Label the jacks.

■

Ground the system.

■

Insert the batteries into the processor module.

■

Initialize the system.

■

Check the LEDs on the modules.

The PARTNER Advanced Communications System can be installed in one of three
configurations:

■

Stand-alone PARTNER ACS processor module

■

2-Slot Carrier, which can hold up to two modules

■

5-Slot Carrier, which can hold up to five modules

«
...
34
35
36
37
38
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов