Avaya programming and use Скачать руководство пользователя страница 398

Страница: 398 / 468

PARTNER

Advanced Communications System Installation, Programming, and Use

System Telephone Problems

11-8

“Priv.” Is Displayed Instead of Caller ID Information

Possible Cause: The caller used a star code,

*67

, to block Caller ID information or has instructed

the telephone company to block Caller ID information.

What to do: Nothing; this is the normal operation for these conditions.

“- - - - - - - - - - - -” Is Displayed Instead of Caller ID
Information

Possible Cause: The call originated outside the area for which the telephone company can provide
Caller ID information.

What to do: Nothing; this is normal operation for the Caller ID service.

Some Caller ID Information Does Not Display

Possible Cause: Not all calls on Caller ID lines are displayed. This varies by local telephone
company.

What to do: If Caller ID information for a large number of calls is not displayed, contact your local
telephone company.

Intercom Autodialer Does Not Work Properly

Possible Cause 1: Telephone cord is plugged into wrong jack on bottom of Intercom Autodialer.

What to do: Plug the modular telephone cord into the correct jack—see

“Connecting a PARTNER-

CA48 Intercom Autodialer” on page 2-39

for instructions.

■

If the Intercom Autodialer works properly, the problem is solved.

■

If the problem remains, go to Possible Cause 2.

Possible Cause 2: Intercom Autodialer is not receiving auxiliary power.

What to do: Make sure the Intercom Autodialer is plugged into an electrical outlet.

■

If the Intercom Autodialer works properly, the problem is solved.

■

If the problem remains, go to Possible Cause 3.

Possible Cause 3: The cord is defective.

What to do: Unplug the cord from the base of the Intercom Autodialer and the wall jack. Replace
the cord with a cord that you know works.

■

If the Intercom Autodialer works, the cord is faulty. Call the helpline number listed on the front,
inside cover to arrange for a replacement.

■

If the problem remains, go to Possible Cause 4.

Содержание programming and use





















































































































































































































































































































































































































































































Результаты поиска

Содержание programming and use

Отзывы:

Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 398 / 468

Результаты поиска

Содержание programming and use

Отзывы: