Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 149 / 468

Programming System Options
Pool Programming
4-51
Considerations
4
■
For extension 10 and any extensions for which Line Access Mode (#313) is set to Key, this
feature is automatically set to No Access.
■
When a user has access to a pool for outgoing calls, you can customize dialing restrictions for
the user’s extension by using Outgoing Call Restriction (#401) and Disallowed Phone
Number Lists (#404).
■
To restrict a pooled extension from receiving and/or making calls on individual lines, you must
use Line Access Restriction (#302).
■
Caller ID information does not appear for ringing calls on lines belonging to a pool
programmed for Out Only or for No Access.
Programming
4
To restrict an extension from making or receiving calls on all the lines in a specific pool:
1. Press
f00ss#315
.
2. Enter the number of the extension to be programmed. A display similar to the following
appears:
Pool Access Rstr 23
Pool:
3. Enter the pool number (880, 881, 882, or 883) to be restricted at this extension. The current
restriction is displayed.
4. Press
D
until the appropriate value appears:
■
1 = No Restriction (calls permitted on all lines in that pool; the factory setting)
■
2 = Out Only (can only make outside calls, not receive them, on lines in that pool)
■
3 = In Only (can only receive calls, not make them, on lines in that pool)
■
4 = No Access (cannot receive or make calls, but can receive transferred calls on lines in
that pool)
5. Do one of the following:
■
To restrict another pool at this extension, press
n
or
p
until the pool number
shows on the display. Then repeat Step 4.
■
To restrict another extension, press
N
or
P
and begin at Step 2.
6. Select another procedure, or exit programming mode.