manualshive.com logo in svg

Avaya programming and use, Инструкция по установке и эксплуатации, Страница: 363 / 468

Поделиться
Скачать
Avaya programming and use Скачать руководство пользователя страница 363

Using Auxiliary Equipment

Voice Messaging Systems

9-47

Programming For Release 2.0 or Earlier

9

To change the VMS Hunt Delay setting for the voice messaging system’s Automated Attendant 
service:

1.

Press 

f00ss#506

 at extension 10 or 11. 

2.

Press 

D

 until the appropriate value appears:

■

Immediate (the factory setting) 

 

■

Delay

3.

Select another procedure, or exit programming mode.

Programming For Release 3.0 or Later

9

To change the VMS Hunt Delay setting for the voice messaging system’s Automated Attendant 
service:

1.

Press 

f00ss#506

 at extension 10 or 11. 

2.

Select Day or Night mode by entering 

1

 or 

2

 respectively (the factory setting is 1 = Day).

3.

Enter the line number.

The current setting is displayed.

4.

To set VMS Hunt Delay, press 

D

 until the appropriate value for the number of rings 

appears: 0–6 (2 is the factory setting).

5.

To set VMS Hunt Delay for another line, press 

n

 or 

p

 until the line number 

appears on the display. Then repeat Step 4.

6.

Select another procedure, or exit programming mode.

VMS Hunt Schedule (#507) 

9

Use this feature to determine whether the outside lines assigned to Hunt Group 7 hunt through 
the VMS Hunt Group all the time, only during Day operation (Night Service is off), or only during 
Night operation (Night Service is on). This feature affects only the Automated Attendant service of 
the voice messaging system. For Release 3.0 and later systems, you can program VMS Hunt 
Schedule on a per-line basis.

Considerations

9

■

You must use Hunt Group Extensions (#505) to assign the extensions associated with the 
voice messaging system hardware to Hunt Group 7.

■

If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service 
Button (#503) to program a Night Service Button for extension 10.

■

When the VMS Hunt Schedule is set to Day Only and Night Service is turned off (in Day 
mode), calls coming in on lines assigned to the hunt group are sent to the hunt group. If Night 
Service is turned on (in Night mode), incoming calls do not go to the hunt group.

■

When the VMS Hunt Schedule is set to Night Only and Night Service is turned off (in Day 
mode), calls coming in on lines assigned to the hunt group are not sent to the hunt group. If 
Night Service is turned on (in Night mode), incoming calls go to the hunt group.

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов