Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 840

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 92

6

On the Region Options page, specify the following parameters:

■

Select Objects: Selected

■

Mid-Ordinate Distance: 1.000’

7

Click Pick In Drawing.

8

In the drawing, click the orange corridor boundary.

In the Simplify Surface wizard, notice the value for Total Points Selected
In Region. This is the current number of points in the selected region.

9

Click Next.

10

On the Reduction Options page, specify the following parameters:

■

Percentage Of Points To Remove: Selected, 50%

■

Maximum Change In Elevation: Cleared

11

Click Apply.

At the bottom of the wizard, notice the Total Points Removed value. This
value is the number of points that the simplify surface command removed
within the selected boundary.

NOTE

You can click Apply again to repeat the Simplify Surface command

and keep the wizard open. If you click Finish, the Simplify Surface command
is repeated and the wizard is closed.

12

Click Cancel.

13

Zoom in to the surface.

Notice that the points are not as dense as they were at the beginning of
the exercise, and the new, gray surface contours are very similar to the
original contours. The Simplify Surface command reduced the amount
of data that the surface uses without sacrificing much surface accuracy.

80 | Chapter 5 Surfaces Tutorials

«
...
90
91
92
93
94
...
»

Содержание AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов