Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 307 | Manualshive

Страница: 307 / 840

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 307

2

In profile view PV-1, select the red layout profile. Right-click. Click Edit
Profile Geometry.

3

In the Profile Layout Tools toolbar, click

.Copy Profile

4

In the Copy Profile Data dialog box, specify the following parameters:

To use more advanced features of the product, you will make the profile
copy shorter than the original.

NOTE

The station values recommended in this step have been chosen because

in the drawing

Profile-3B.dwg

, they include the two center tangents of the

Layout (1) profile. If you are using another drawing with a much different
profile, you may have to enter different station values. To be included in the
profile copy, a complete tangent must be within the copied range. If part of
a tangent extends beyond the range, the whole tangent is excluded from
the selection set.

■

PVI Range: Station Range

■

Start: 300

■

End: 1700

■

Destination Profile Options: Create New Profile

5

Click OK.

The new profile is drawn on top of the old one.

6

In Toolspace, on the Prospector tab, expand the Alignments

➤

Centerline

Alignments

➤

Ridge Road

➤

Profiles collection under the alignment.

Your profile copy is displayed with the layout profile icon

and name.

7

Press Esc.

Offset the profile

1

In the drawing, click the profile view. Right-click. Click Profile View
Properties.

2

On the Profiles tab, clear the Draw check box for the original layout
profile, Layout (1).

Clearing the check box removes the original profile from the profile view.
Later, you can restore this profile to the profile view if you wish.

Exercise 3: Copying a Profile and Offsetting it Vertically | 295

«
...
305
306
307
308
309
...
»

Содержание AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов