manualshive.com logo in svg

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Руководство по обучению, Страница: 372 / 840

Поделиться
Скачать
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 372

Examine alignments in a site

1

Open Parcel-1E.dwg, which is located in the 

tutorial drawings folder

 (page

819)

.

This drawing contains five roads off of a main West-East road. The two
Northern side roads have centerline alignments, each of which created
a parcel in the roadway and cul-de-sac center island. In the next few steps,
you will convert the centerline of one of the Southern side roads to an
alignment and prevent it from forming parcels.

2

In Toolspace, on the Prospector tab, expand Sites

 ➤ 

Site

1

 ➤ 

Alignments

 ➤ 

Centerline Alignments.

Notice that the four existing centerline alignments all reside in Site 1,
while the top-level Alignments collection (above the Sites collection) is
empty.

Create an alignment outside of a site

1

Click Home tab

 ➤ 

Create Design panel

 ➤ 

Alignment drop-down

 ➤ 

Create

Alignment From Objects

 .

2

When prompted, select the red centerline for the road in the lower middle
of the drawing.

3

Press Enter twice.

The Create Alignment from Objects dialog box is displayed. Notice that,
by default, the Site is set to <None>.

4

Click OK.

5

Expand the top-level Alignments

 ➤ 

Centerline Alignments collection in

Prospector.

Notice that the new alignment was placed in the Alignments collection,
and did not form a parcel in the cul-de-sac center island. This happened
because you accepted the default <None> Site selection when you were
prompted to select a site in step 3. In the next few steps, you will move
one of the two existing cul-de-sac road alignments out of its existing site
and into the top-level Alignments collection.

Move alignments out of a site

1

In Toolspace, on the Prospector tab, right-click Alignment - (4), which is
the cul-de-sac alignment to the Northeast of the alignment you created.
Click Move To Site.

360 | Chapter 10   Parcels Tutorials

Содержание AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов