Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 603 | Manualshive

Страница: 603 / 840

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 603

2

Double-click the Earthworks style to open the Quantity Takeoff Criteria
dialog box.

3

Click the Material List tab.

This tab contains a pre-defined table for calculating earthworks (cut and
fill) by comparing a Datum surface layer to an existing ground surface
layer.

4

Expand the Earthworks item in the table.

You will use the Earthworks criteria in the next exercise to calculate the
quantity takeoff.

Notice that the Condition for the EG surface is set to Base, while the
condition of the Datum surface is set to Compare. This indicates that the
material is going to be fill when Datum is above EG, and cut when Datum
is below EG.

Also note the three Factor values in the table:

■

The Cut factor is typically used as an expansion factor for excavated
material. It is usually 1.0 or higher.

■

The Fill factor is typically used as a compaction factor for fill material.
It is usually 1.0 or higher.

■

The Refill factor indicates what percentage of cut material can be
reused as fill. It should be 1.0 or lower.

5

Click Cancel.

To continue this tutorial, go to

Exercise 2: Creating a Material List

(page 591).

Exercise 2: Creating a Material List

In this exercise, you will create a material list, which defines the quantity
takeoff criteria and surfaces to compare during an earthworks analysis.

A material list is required to generate either an earthworks volume report or
a mass haul diagram. A material list specifies the existing ground and datum
surface to compare, and is saved with the sample line properties.

For more information, see the AutoCAD Civil 3D Help topic Generating Material
Lists.

This exercise continues from

Exercise 1: Reviewing Quantity Takeoff Criteria

and Report Settings

(page 590).

Exercise 2: Creating a Material List | 591

«
...
601
602
603
604
605
...
»

Содержание AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов