Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 152 | Manualshive

Страница: 152 / 840

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Скачать руководство пользователя страница 152

Reprocess the survey points

NOTE

This exercise uses

Survey-2B.dwg

, which you saved in the

My Civil Tutorial

Data folder

(page 819) during the previous exercise. If you did not do this, you can

use the copy of

Survey-2B.dwg

that is in the

tutorial drawings folder

(page 819),

but you will get duplicate objects when you update the survey data.

1

In Toolspace, on the Survey tab, expand the Survey Databases

➤

Survey

1

➤

Import Events collection.

NOTE

If you cannot expand the collection, right-click the database name

and click Open For Edit.

2

Select Import Events.

The import options that were specified when the survey data was imported
are displayed in the Toolspace list view. Notice that Point Identifier Offset
is 10000. This indicates that as each survey point was imported, 10000
was added to the original point number. You will remove this offset value
in the following steps.

3

Under the Survey-1.fbk import event, select Survey Points.

In the Toolspace list view, compare the values in the Number column
with the values in the Original Number column. The Number column
reflects the offset of 10000 that was added to the point numbers when
they were imported.

4

Right-click Survey-1.fbk. Click Re-Import.

5

In the Re-Import Field Book dialog box, clear the Assign Offset To Point
Identifiers check box.

6

Click OK.

NOTE

If you are prompted to abort the import process, click No.

The points are re-imported, and the linework is reprocessed.

Update and reprocess a survey figure

1

In Toolspace, on the Survey tab, select the Survey Databases

➤

Survey

1

➤

Figures collection.

2

In the list view, select BLDG7. Right-click. Click Zoom To.

140 | Chapter 6 Survey Tutorials

«
...
150
151
152
153
154
...
»

Содержание AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов