AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 529 / 650

Version 6.6 529 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
Parameter Description
receive a single CRLF (the "pong"). If the client does not
receive a "pong" within an appropriate amount of time, it
considers the flow failed.
Note: The device sends a CRLF message to the Proxy Set
only if the Proxy Keep-Alive feature (EnableProxyKeepAlive
parameter) is enabled and its transport type is set to TCP or
TLS. The device first sends a SIP OPTION message to
establish the TCP/TLS connection and if it receives any SIP
response, it continues sending the CRLF keep-alive
sequences.
EMS: Ping Pong Keep Alive Time
[PingPongKeepAliveTime]
Defines the periodic interval (in seconds) after which a “ping”
(double-CRLF) keep-alive is sent to a proxy/registrar, using the
CRLF Keep-Alive mechanism.
The default range is 5 to 2,000,000. The default is 120.
The device uses the range of 80-100% of this user-defined
value as the actual interval. For example, if the parameter
value is set to 200 sec, the interval used is any random time
between 160 to 200 seconds. This prevents an “avalanche” of
keep-alive by multiple SIP UAs to a specific server.
44.8 General SIP Parameters
The general SIP parameters are described in the table below.
Table 44-32: General SIP Parameters
Parameter Description
[IgnoreAuthorizationStale] Enables the device to re-send REGISTER messages even if it receives
a SIP 407 with "state=FALSE" from the proxy in response to its
REGISTER message.

[0] = (Default) Disable. The device stops registering with the proxy
server if it receives a SIP 407 (with "stale=FALSE") response.

[1] = Enable. The device re-sends the REGISTER message even it
was previously rejected by a 407 with "stale=FALSE".
[GwSDPConnectionMode
] Defines how the device displays the Connection ("c=") line ("c=") in the
SDP Offer/Answer model.

[0] = (Default) The Connection ("c=") line is displayed as follows:

Offer: In the session description only.

Answer: In the session description and in each media ("m=")
description.

[1] = For Offer and Answer, the Connection ("c=") line is displayed
only in the session description; not in any media ("m=") descriptions.

[2] = The Connection ("c=") line is displayed only in media ("m=")
descriptions.
Web: SIP Remote Reset
CLI: sip-remote-reset
[EnableSIPRemoteReset
]
Enables a specific device action upon the receipt of a SIP NOTIFY
request, where the action depends on the value received in the Event
header.

[0] Disable (default)

[1] Enable