AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 260 / 650

User's Manual 260 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
The number can include up to 50 digits.
Web/EMS: Source Phone
Prefix
[PREFIX_SourcePrefix]
Defines the prefix and/or suffix of the calling (source) telephone
number. You can use special notations for denoting the prefix. For
example,
[100- 199](100,101,105) denotes a number that starts with
100 to 199 and ends with 100, 101 or 105. To denote any prefix, use
the asterisk (*) symbol or to denote calls without a calling number,
use the $ sign. For a description of available notations, see 'Dialing
Plan Notation for Routing and Manipulation Tables' on page
473 .
The number can include up to 50 digits.
Operation (IP Destination)
Web: Dest. IP Address
EMS: Address
[PREFIX_DestAddress]
Defines the IP address (in dotted-decimal notation or FQDN) to where
the call is sent. If an FQDN is used (e.g., domain.com), DNS
resolution is done according to the DNSQueryType parameter.
For ENUM-based routing, enter the string value "ENUM". The device
sends an ENUM query containing the destination phone number to an
external DNS server, configured in the Multiple Interface table. The
ENUM reply includes a SIP URI which is used as the Request-URI in
the subsequent outgoing INVITE and for routing (if a proxy is not
used). To configure the type of ENUM service (e.g., e164.arpa), use
the EnumService parameter.
Notes:

This field and any value assigned to it is ignored if you have
configured a destination IP Group for this routing rule (in the 'Dest
IP Group ID' field).

To reject calls, enter the IP address 0.0.0.0. For example, if you
want to prohibit international calls, then in the 'Dest Phone Prefix'
field, enter 00 and in the 'Dest IP Address' field, enter 0.0.0.0.

For routing calls between phones connected to the device (i.e.,
local routing), enter the device's IP address.

When the device's IP address is unknown (e.g., when DHCP is
used), enter IP address 127.0.0.1.

When using domain names, enter the DNS server's IP address or
alternatively, configure these names in the Internal DNS table (see
'Configuring the Internal DNS Table' on page
142 ).

The IP address can include the following wildcards:

"x": represents single digits. For example, 10.8.8.xx denotes
all addresses between 10.8.8.10 and 10.8.8.99.

"*": represents any number between 0 and 255. For example,
10.8.8.* denotes all addresses between 10.8.8.0 and
10.8.8.255.
Web: Port
EMS: Destination Port
[PREFIX_DestPort]
Defines the destination port to where you want to route the call.
Web/EMS: Transport Type
[PREFIX_TransportType]
Defines the transport layer type for sending the IP call:

[-1] Not Configured

[0] UDP

[1] TCP

[2] TLS
Note: When set to Not Configured (-1), the transport type defined by
the SIPTransportType parameter is used.