AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 126 / 650

User's Manual 126 Document #: LTRT-65432
MP-11x & MP-124
Note: The IP Settings page appears only in the following circumstances:
•
Upon initial configuration (i.e., IP interfaces have never been configured).
•
The Multiple Interface Table button has not been clicked in any previous access to
this page and only a single IP address has been configured.
•
The device has been restored to default settings.
If you have clicked the Multiple Interface Table button or have configured multiple
interfaces using any other non-Web management tool, the Multiple Interface Table
page appears instead of the IP Settings page.
2. To access the Multiple Interface table so that you can configure multiple network
interfaces, click the Multiple Interface Table button, located under the Multiple
Interface Settings group; a confirmation message box appears:
Figure 12-3: Confirmation Message for Accessing the Multiple Interface Table
3. Click OK; the Multiple Interface Table page appears:
4. In the 'Add Index' field, enter the desired index number for the new interface, and then
click
Add Index ; the index row is added to the table.
5. Configure the interface according to the table below.
6. Click the Apply button; the interface is added to the table and the Done button
appears.
7. Click Done to validate the interface. If the interface is not valid (e.g., if it overlaps with
another interface in the table or if it does not adhere to the other rules as summarized
in 'Multiple Interface Table Configuration Summary and Guidelines' on page
129 ), a
warning message is displayed.
8. Save the changes to flash memory and reset the device (see 'Saving Configuration' on
page
366 ).
To view configured network interfaces that are currently active, click the IP Interface
Status Table button. For more information, see Viewing Active IP Interfaces on page
415 .
Table 12-1: Multiple Interface Table Parameters Description
Parameter Description
Table parameters
Index
[InterfaceTable_Index]
Table index row of the interface.
The range is 0 to 15.