AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 491 / 650

Version 6.6 491 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
Parameter Description
[SNMPEngineIDString] Defines the SNMP engine ID for SNMPv2/SNMPv3 agents.
This is used for authenticating a user attempting to access the
SNMP agent on the device.
The ID can be a string of up to 36 characters. The default is
00:00:00:00:00:00:00:00:00:00:00:00 (12 Hex octets
characters). The provided key must be set with 12 Hex values
delimited by a colon (":") in the format xx:xx:...:xx. For
example, 00:11:22:33:44:55:66:77:88:99:aa:bb
Notes:

For this parameter to take effect, a device reset is required.

Before setting this parameter, all SNMPv3 users must be
deleted; otherwise, the parameter setting is ignored.

If the supplied key does not pass validation of the 12 Hex
values input or it is set with the default value, the engine ID
is generated according to RFC 3411.
Web: SNMP Trap Destination Parameters
EMS: Network > SNMP Managers Table
Note: Up to five SNMP trap managers can be defined.
SNMP Manager
[SNMPManagerIsUsed_x]
Determines the validity of the parameters (IP address and port
number) of the corresponding SNMP Manager used to receive
SNMP traps.

[0] (Check box cleared) = Disabled (default)

[1] (Check box selected) = Enabled
Web: IP Address
EMS: Address
[SNMPManagerTableIP_x]
Defines the IP address of the remote host used as an SNMP
Manager. The device sends SNMP traps to this IP address.
Enter the IP address in dotted-decimal notation, e.g.,
108.10.1.255.
Web: Trap Port
EMS: Port
[SNMPManagerTrapPort_x]
Defines the port number of the remote SNMP Manager. The
device sends SNMP traps to this port.
The valid SNMP trap port range is 100 to 4000. The default
port is 162.
Web: Trap Enable
[SNMPManagerTrapSendingEnabl
e_x]
Enables the sending of traps to the corresponding SNMP
manager.

[0] Disable = Sending is disabled.

[1] Enable = (Default) Sending is enabled.
Web: Trap User
[SNMPManagerTrapUser_x]
Defines the SNMPv3 USM user or SNMPv2 user to associate
with the trap destination. This determines the trap format,
authentication level, and encryption level. By default, it is
associated with the SNMPv2 user (SNMP trap community
string).
The valid value is a string.
Web: Trap Manager Host Name
[SNMPTrapManagerHostName]
Defines an FQDN of the remote host used as an SNMP
manager. The resolved IP address replaces the last entry in
the Trap Manager table (defined by the
SNMPManagerTableIP parameter) and the last trap manager
entry of snmpTargetAddrTable in the snmpTargetMIB. For
example: 'mngr.corp.mycompany.com'.
The valid range is a string of up to 99 characters.