AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 377 / 650

Version 6.6 377 MP-11x & MP-124
User's Manual 32. Software Upgrade

Each new Dial Plan index begins with a Dial Plan name enclosed in square brackets
"
[...]" on a new line.

Each line under the Dial Plan index defines a dialing prefix and the number of digits
expected to follow that prefix. The prefix is separated by a comma "," from the number
of additional digits.

The prefix can include numerical ranges in the format [x- y], as well as multiple
numerical ranges [n- m] [x- y] (no comma between them).

The prefix can include the asterisk "*" and number "#" signs.

The number of additional digits can include a numerical range in the format x-y.

Empty lines are ignored.

Lines beginning with a semicolon ";" are ignored. The semicolon can be used for
comments.
Below shows an example of a Dial Plan file (in ini -file format), containing two dial plans:
; Example of dial-plan configuration.
; This file contains two dial plans:
[ PLAN1 ]
; Destination cellular area codes 052, 054, and 050 with 8 digits.
052,8
054,8
050,8
; Defines International prefixes 00, 012, 014.
; The number following these prefixes may
; be 7 to 14 digits in length.
00,7-14
012,7-14
014,7-14
; Defines emergency number 911. No additional digits are expected.
911,0
[ PLAN2 ]
; Defines area codes 02, 03, 04.
; In these area codes, phone numbers have 7 digits.
0
[2- 4],7
; Operator services starting with a star: *41, *42, *43.
; No additional digits are expected.
*4
[1- 3],0
The procedure below provides a summary on how to create a Dial Plan file and select the
required Dial Plan index.

To create a Dial Plan file:
1. Create a new file using a text-based editor (such as Notepad) and configure your Dial
Plans, as required.
2. Save the file with the ini file extension name (e.g., mydialplans.ini).
3. Convert the ini file to a dat binary file, using AudioCodes DConvert utility. For more
information, refer to DConvert Utility User's Guide .
4. Install the converted file on the device, as described in 'Loading Auxiliary Files' on
page
369 .
5. The required Dial Plan is selected using the 'Dial Plan Index' parameter. This
parameter can be set to
0 through 7 , where 0 denotes PLAN1, 1 denotes PLAN2, and
so on.