AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 581 / 650

Version 6.6 581 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
44.11.5 Supplementary Services Parameters
This subsection describes the device's supplementary telephony services parameters.
44.11.5.1 Caller ID Parameters
The caller ID parameters are described in the table below.
Table 44-42: Caller ID Parameters
Parameter Description
Caller ID Permissions Table
Web: Caller ID Permissions Table
EMS: SIP Endpoints > Caller ID
[EnableCallerID]
This table parameter enables (per port) Caller ID generation
(for FXS interfaces) and detection (for FXO interfaces).
The format of this parameter is as follows:
[EnableCallerID]
FORMAT EnableCallerID_Index = EnableCallerID_IsEnabled;
[\EnableCallerID]
Where,

Index = Port number (where 0 denotes Port 1).
For example:
EnableCallerID 0 = 1; (caller ID enabled on Port 1)
EnableCallerID 1 = 0; (caller ID disabled on Port 2)
Note: For a detailed description of this table, see Configuring
Caller ID Permissions on page 310 .
Caller Display Information Table
Web: Caller Display Information
Table
EMS: SIP Endpoints > Caller ID
[CallerDisplayInfo]
This table parameter enables the device to send Caller ID
information to the IP side when a call is made. The called party
can use this information for caller identification. The information
configured in this table is sent in the SIP INVITE message's
From header.
The format of this parameter is as follows:
[CallerDisplayInfo]
FORMAT CallerDisplayInfo_Index =
CallerDisplayInfo_DisplayString,
CallerDisplayInfo_IsCidRestricted;
[\CallerDisplayInfo]
Where,

Index = Port number, where 0 denotes Port 1.
For example:
CallerDisplayInfo 0 = Susan C.,0;
("Susan C." is sent as
the Caller ID for Port 1)
CallerDisplayInfo 1 = Mark M.,0;
("Mark M." is sent as
Caller ID for Port 2)
Note: For a detailed description of this table, see Configuring
Caller Display Information on page 307 .