AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 488 / 650

User's Manual 488 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
EMS: Disable WEB Config
[DisableWebConfig]
Determines whether the entire Web interface is read-only.

[0] = (Default) Enables modifications of parameters.

[1] = Web interface is read-only.
When in read-only mode, parameters can't be modified. In
addition, the following pages can't be accessed: 'Web User
Accounts', 'Certificates', 'Regional Settings', 'Maintenance
Actions' and all file-loading pages ('Load Auxiliary Files',
'Software Upgrade Wizard', and 'Configuration File').
Notes:

For this parameter to take effect, a device reset is required.

To return to read/write after you have applied read-only
using this parameter (set to 1), you need to reboot your
device with an ini file that doesn't include this parameter,
using the AcBootP utility.
[ResetWebPassword] Resets the username and password of the primary ("Admin")
and secondary ("User") accounts to their default settings
("Admin" and "Admin" respectively), and deletes all other users
that may have been configured.

[0] = (Default) Password and username retain their values.

[1] = Password and username are reset.
Notes:

For this parameter to take effect, a device reset is required.

You cannot reset the username and password through the
Web interface (by loading an ini file or on the AdminPage).
To reset the username and password:

BootP: Set this parameter in an ini file and load it to the
device through BootP (for more information, refer to the
AcBootP Utility User's Guide).

SNMP:
1) Set acSysGenericINILine to
WEBPasswordControlViaSNMP = 1, and reset the
device with a flash burn (set
acSysActionSetResetControl to 1 and
acSysActionSetReset to 1).
2) Change the username and password in the
acSysWEBAccessEntry table. Use the following format:
Username acSysWEBAccessUserName: old/pass/new
Password acSysWEBAccessUserCode:
username/old/new
[ScenarioFileName] Defines the file name of the Scenario file to be loaded to the
device. The file name must have the .dat extension and can be
up to 47 characters. For loading a Scenario using the Web
interface, see Loading a Scenario to the Device on page
57 .