AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 160 / 650

User's Manual 160 Document #: LTRT-65432
MP-11x & MP-124
13.4.1 Enabling IPSec
To enable IKE and IPSec processing, you must enable the IPSec feature, as described
below.

To enable IPSec:
1. Open the General Security Settings page ( Configuration tab > VoIP menu >
Security > General Security Settings ).
Figure 13-3: Enabling IPSec
2. Set the 'Enable IP Security' parameter to Enable .
3. Click Submit , and then reset the device with a flash burn.
13.4.2 Configuring IP Security Proposal Table
The IP Security Proposal Table page is used to configure Internet Key Exchange (IKE) with
up to four proposal settings. Each proposal defines an encryption algorithm, an
authentication algorithm, and a Diffie-Hellman group identifier. The same set of proposals
applies to both Main mode and Quick mode.
Note: You can also configure the IP Security Proposals table using the table ini file
parameter IPsecProposalTable (see 'Security Parameters' on page 503 ).

To configure IP Security Proposals:
1. Open the IP Security Proposal Table page ( Configuration tab > VoIP menu >
Security submenu > IPSec Proposal Table ).
2. Click the Add button; the following dialog box appears:
Figure 13-4: IP Security Proposals Table - Add Record Dialog Box
3. Configure the parameters, as required. For a description of the parameters, see the
table below.
4. Click Submit .