AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 622 / 650

User's Manual 622 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
Web: Channel Select Mode
EMS: Channel Selection Mode
[ChannelSelectMode]
Defines the method for allocating incoming IP-to-Tel calls to
a channel (port) for all Hunt Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Cyclic Ascending.

[6] By Source Phone Number

[9] Ring to Hunt Group

[11] Dest Ascending
Notes:

For a detailed description of the parameter's options, see
'Configuring Hunt Group Settings' on page
237 .

Channel select mode per Hunt Group can be configured
in the Hunt Group Settings (see 'Configuring Hunt Group
Settings' on page
237 ).
Web: Default Destination Number
[DefaultNumber]
Defines the default destination phone number, which is used
if the received message doesn't contain a called party
number and no phone number is configured in the <Endpoint
Phone Number Table' (see to Configuring Endpoint Phone
Numbers on page
235 ). This parameter is used as a starting
number for the list of channels comprising all the device's
Hunt Groups.
The default is 1000.
Web: Source IP Address Input
[SourceIPAddressInput]
Determines which IP address the device uses to determine
the source of incoming INVITE messages for IP-to-Tel
routing.

[-1] = (Default) Not configured.

[0] SIP Contact Header = The IP address in the Contact
header of the incoming INVITE message is used.

[1] Layer 3 Source IP = The actual IP address (Layer 3)
from where the SIP packet was received is used.