ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 57 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
57
DANGER
THE ELECTROLYTE CONTAINED IN THE BATTERIES IS HIGHLY CORROSIVE. AVOID
ALL CONTACT WITH CLOTHING, SKIN OR EYES. IN THE EVENT OF CONTACT, RINSE
THE AFFECTED AREA IMMEDIATELY WITH CLEAN WATER.
CAUTION
Never add pure acid. Use distilled or
demineralised water.
7.5. BATTERY
To ensure that the diesel engine starts up
under all circumstances, the battery must be
maintained in perfect charge condition.
- Remove all traces of salt that may form on
the battery terminals.
- Check the level of electrolyte in the battery
cells.
- If the electrolyte overflows, rinse the affected
metal surfaces immediately in clean water.
- Check the charge state regularly by measuring
the electrolyte density.

Charging the battery
- Use a 12 Volt charger adapted to the battery's
capacity.
- Disconnect the battery from the machine before charging it.
- To preserve the battery's lifetime, avoid quick recharges.
- Only charge the battery in well-ventilated premises.

Disconnecting - Connecting the battery
To prevent any risk of short circuit :
1- Disconnect the Negative terminal (-)
before the Positive terminal (+)
2- Reconnect the Positive terminal (+)
before the Negative terminal (-)

Extended storage
- If the machine needs to be stored for
long periods, it is best to remove the
battery and store it in dry premises away
from frost.
- Charge the battery if the battery voltage
in open circuit is under 12.40 volts.
- Check the electrolyte level and recharge
the battery approximately every two
months.
CAUTION
BEFORE CHARGING THE BATTERY,
CUT THE POWER TO THE MACHINE
OR DISCONNECT THE BATTERY
E
lect
rolyte
d
e
n
sity
Discharge Depth
100% 00% 20% 40% 60% 80%
1.20
1.15
1.10
1.30
1.25