ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 30 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
30
15- Fault System / Maintenance indicator:
This light flashes slowly when a service / pre-scheduled maintenance
operation is required.
This light is on steady (and an alarm sounds) if there is a control
system fault.
Refer to section 5.3. SYSTEM FAULT.
16- Indicator
– Outrigger Operation and Ground Contact:
This light flashes when the levelling mode (automatic or manual) is
activated as well as during the movement of the outriggers.
This light is lit on steady when all four outrigger are in contact with
the ground.
Refer to section 4.8. OUTRIGGERS
17- Overload indicator:
This light flashes when the work platform's capacity is exceeded.
Refer to Section 5.2. LOAD CONTROL
18- Tilt indicator:
The light flashes when the outriggers are in motion.
The light is on steady when the machine is on a slope exceeding the
maximum tilt allowed or when the chassis is tilted beyond its
admissible tilt.
Refer to 0SAFETY DEVICES
19- Horn :
This switch is used to warn people around the machine of its
presence.
DANGER
IF THE TILT INDICATOR LIGHT COMES ON AND AN ALARM SOUNDS WHEN THE
WORK PLATFORM IS RAISED, IMMEDIATELY LOWER THE PLATFORM, STARTING
BY BRINGING THE UPPER TELESCOPE BACK IN.
CAUTION
An elevation movement cannot be controlled using the fixed
platform control station if the mobile platform control station is not
on its support on the work platform.
.