ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 50 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
50
DANGER
DO NOT ACTIVATE THE EMERGENCY
STOP TO CUT THE ALARM AND
CONTINUE WORKING.
IF POSSIBLE, LOWER THE PLATFORM
BACK AND STOP USING THE MACHINE
5.3 SYSTEM FAULT
The system fault light comes on when the
control system detects an anomaly on one of
the components or an operating fault.
Depending on the importance of the fault for the
safe use of the machine, the system authorises
the operation of certain command in degraded
mode or completely disables the use of the
machine.
The exact nature of the fault is indicated on the control module screen.
The machine's operation is re-established when the fault disappears or after the emergency stop is
recycled (depending on the nature of the fault).
In all cases, the machine's use must be interrupted until the fault is corrected. After repair, a full
check on the operation of the machine and the safety mechanisms must be carried out by a
qualified person before the machine is returned into service.
If a fault occurs when the platform is raised and is occupied by personnel, appropriate measures
must be taken to rescue the platform's occupants.
5.4 MOVEMENT ALARM
A movement alarm may sound:
- During drive movements
- During structure movements
- During drive and structure movements