ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 16 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
16
DANGER
NEVER MOVE THE MACHINE OR MOVE PERSONNEL NEAR ELECTRICAL CABLES
OR EQUIPMENT.
ALWAYS ASSUME THAT THE ELECTRICAL CABLES OR APPLIANCES ARE LIVE
UNLESS YOU ARE SURE THAT THE POWER HAS BEEN CUT.
PERSONNEL ON THE GROUND MUST KEEP AWAY IF THE MACHINE IS BEING USED
NEAR ELECTRIC LINES OR POWERED EQUIPMENT.
IN THE EVENT OF CONTACT WITH AN ELECTRIC LINE OR POWERED APPLIANCE,
PERSONNEL ON THE GROUND MUST KEEP AWAY FROM THE MACHINE UNTIL THE
ELECTRIC POWER IS CUT.
ELECTROCUTION HAZARDS 2.4.

This machine is not insulated and does not offer any
protection when near or in contact with an electric current.

Maintain a minimum safety distance in relation to electric
lines (insulated or otherwise) or powered devices. The
minimum distances indicated in the table below are
provided for information purposes. Regulations specific to
the country or site where the machine is used may
demand greater safety distances.

Take into account the machine's movements and possible
sway of the electric lines.

Never raise the platform during a storm or lightning.

Only approved personnel can perform maintenance work
on the electrical box of the electric motor. In any case,
access to this electrical box (maintenance or else) must be
restricted to an approved person (electrocution hazard).
Phase to phase
voltage
Minimum safe
distance
0 to 300 V Avoid contact
300 V to 50 KV 3.05 metres
50 KV to 200 KV 4.60 metres
200 KV to 350 KV 6.10 metres
350 KV to 500 KV 7.62 metres
500 KV to 750 KV 10.67 metres
750 KV to 1000 KV 13.72 metres