ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 19 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
19
DANGER
FAILURE TO PROPERLY MAINTAIN AND CHECK THIS MACHINE MAY RESULT IN
DEATH OR SERIOUS INJURIES.
THIS MACHINE MUST NOT BE USED IF IT IS NOT IN PERFECT WORKING ORDER.
Before use, careful inspection and operating check are recommended to ensure the machine is in
perfect working order.
Do not use the machine if it is damaged or has an operating defect.
Depending on national or local regulations, the machine must be submitted for periodic
verifications and testing.
INSPECTION BEFORE START UP 3.1.
1- Check the machine for oil or fuel leaks. Check the machine's general cleanliness (slippery
substances on the platform floor).
2- Inspect the machine's structure to detect any damaged parts, cracked welds or any other
defect.
3- Check the presence and legibility of the safety stickers. Clean or replace any illegible stickers.
4- Check that there is a copy of the operator and safety manual in the work platform's document
holder.
5- Carry out the inspection tour described below.
Carry out the operating checks described below
INSPECTION TOUR 3.2.
Check in order each element in the list below. For each element, in addition to the criteria
mentioned, check that no parts are loose or missing, that the elements are correctly attached and
that they have no leaks or visible damage.
1- Diesel engine and accessories: Oil level, cooling fluid level
– Hydraulic pumps.
2- Electric motor : link between the plug and the electric motor
3- Electric cables
– Cable travel and tightening of the battery connections.
4- Presence of the lock pins on the outrigger pins.
5- Operating check of the outrigger locking system.
6- Presence of the motor reducer screw.
7- Tracks: Tracks in good condition
– Track correctly tightened (Refer to section 7.3 TRACKS)