ATN MYGALE 23, Перевод с оригинала инструкции

Страница: 46 / 62

OPERATOR AND SAFETY MANUAL
1NO0040UK-01
Mygale 23
46
OPERATION 4.8.2

Automatic levelling
1- Select the platform control station and start one of the motors.
2- Depress the enable button on the mobile upper control station or the enable pedal in the
work platform.
3- Within 10 seconds, depress and hold the automatic levelling control.

The engine speed increases until one of the outriggers contacts the ground.

Once this outrigger contacts the ground, the others come down with the engine at high
speed.
4- Once all four outriggers contact the ground:

The engine speed slows down.

The levelling sequence starts.
5- Keep the control pushed forwards until :

The green indicator light for outrigger ground contact lights up steady.

The tilt indicator light switches off.

An acoustic signal sounds (4 rapid bips).
The outrigger movement stops automatically when the chassis is level.
6- To retract the outriggers, depress the enable button on the mobile upper control station and
within 10 seconds pull the levelling control. When all four outriggers are retracted:

An acoustic signal (4 rapid beeps) sounds.
The outrigger movement stops automatically when they are fully retracted.
-NOTA-
The green indicator light for ground control lights up when the tilt is in the ±0.2° range on
both centerlines and all the outrigger ground contacts are validated.
The outrigger cylinders can be extended to their maximum course: Once phase 5 is completed,
release the automatic levelling control, activate one outrigger manually and push again the
automatic levelling control. The machine will be levelled again to a new stage.
-NOTA-
The machine is more stable when near the ground. If the first stage is sufficient, it is
recommended not to go to the next stabilization stage.