Ateis IDA8 Series Скачать руководство пользователя

Страница: 111 / 559

Product Features

111

load to the zone. This value is used to determine if there is a fault of a normal amplifier.

Measure:

Display the value of measure, which is the gain of an amplifier.

Faults:

Amplifier Gain Too High:

If the measurement > (Unloaded Reference x (100% + Tolerance%)), an Amplifier Gain Too High

fault is recognized. And the fault will occurs, please check the following points:

Make sure there is a good connection between the speaker and the IDA8C/S.

Replace the non-working speaker with a working one.

Check the gain of the amplifiers to see if the value has changed after getting a reference.

If all of the above actions have been checked but the amplifier still receives a fault that is too

high, replace the amplifier.

Amplifier Gain Too Low:

If the measurement < (Full Unloaded Reference x (100% - Tolerance%)), an Amplifier Gain Too

Low fault is recognized. And the fault will occurs, please check the following points:

Check if the signal going into the amplifier is too large. Some amplifiers have an indicator

"Overload". Check this indicator.

Check if speaker is working or damaged.

If all of the above have been checked but the amplifier still receives a fault that is too low,

change the amplifier.

If this fault generated after the speaker configuration is changed, you can perform a reference

again to get new values for a reference.

Amplifier Fail:

If the measurement < (Unloaded Reference / 10), and the fault will occur, please check the

following points:

Check if the amplifier power on.

Check if the gain of the amplifier is too low, please increase the gain from the knob.

Check if the wires between the amplifier and the IDA8 are connected correctly.

If all the points above have been checked completely but still the amplifier receives a fail fault,

please replace the amplifier.

Rating Fault:

If the measurement < 30 while getting the references, and the fault will occurs, please check the

following points:

Check if the amplifier power on.

Check if the gain of the amplifier is too low, please increase the gain from the knob.

Check if the wires between the amplifier and the IDA8 are connected correctly.

If all the points above have been checked completely but still the amplifier receives a fail fault,

please replace the amplifier.

Содержание IDA8 Series
















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды

Ateis IDA8 Series, Руководство пользователя

Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды