DSP Components
505
© 2017, ATEÏS, member of PAX ProAV Group
The pins of the component will output the DTMF status.
o
0~9, A~D,* and #: The status of DTMF code.
o
A: Indicates as ''Any'' pin; when any of the DTMF code is pressed for dialing, the A pin will be
triggered.
Control Window
Caller Mute: Mute the audio of a caller.
Caller Level: Adjust the audio level of a caller.
Ring Mute: Mute the ring audio.
Ring Level: Adjust the level of a ring.
DTMF: If the caller presses any key on its phone after an incoming call was received, the
telephone card will detect and display the numbers that have been triggered on the control
window and change the status of the logic output corresponding to the detected number.
History: Display the history of DTMF numbers from an incoming call.
Auto Answer: The mode of action for answering incoming calls. There are two types of modes:
o
Manual: Press the Dial button on the control window of TC Transmit for receiving calls.
o
After N Rings: The telephone receives the calls automatically after ringing N times.
Hang up sound times: Select the hang up times after hanging up the call.
Disable Hang up sound: Disable the function of hang up sound times.
Noise Suppression: Enable/disable the noise suppression function to dynamically filter out the
noise.
