Ateis IDA8 Series Скачать руководство пользователя

Страница: 294 / 559

IDA8 Global-Net User Manual

294

3.2.13 CD-TOUCH

The CD-TOUCH paging console is a paging interface that allows call-paging, message broadcasting and

DSP matrix parameter control. It contains a 5” full-color backlit touch-screen for simple, user-friendly

operation. The screen offers up to 168 buttons across 14 pages which can be freely assigned in the

software to any zone or group of zones. The CD-TOUCH has 3 hardware keys that can be assigned within

the system control software. All paging parameters for site operation can be pre-programmed and stored

within the console, including message triggering, level adjustment and pre-call chime setup. zone

assignment, naming and grouping.

The CD-Touch-XX units connect to a monitored bus on CAT-5 FTP/STP. This connection also provides

Power Over Ethernet (POE). In case POE is not available, or if the cable run is greater than 300M, an

additional power connection is provided with 24 VDC supply.

CD-TOUCH is available in two different versions with identical hardware and functionality but different

firmware for compatibility with different systems.

CD-TOUCH-AS: For IDA8 and ECS system controllers and slaves

CD-TOUCH-G2: For DIVA8 system controllers

3.2.13.1 Control Panel

Fireman Microphone Hook:

An U-shape hook to place fireman microphone.

Microphone:

Not used.

Power Indicator:

This LED light up when the CD-Touch is powered on.

Содержание IDA8 Series
















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды

Ateis IDA8 Series, Руководство пользователя

Результаты поиска

Содержание IDA8 Series

Отзывы:

Похожие инструкции для IDA8 Series

Бренды по названию

Популярные бренды