Product Features
259
© 2017, ATEÏS, member of PAX ProAV Group
String: The code of the string will depend on the 3rd party devices. The picture above is an
example of sending the command string in ASCII code to Ateis processors (IDA8, UAP G2, ECS,
LAP G2T), the Ateis processors use Hex code, then users need to change the string in Hex code to
ASCII code. The Hex code is %XXh, the XX indicates the character of Hex code.
Please note the Terracom only receive the command string in ASCII code.
Interface: You can send the command string through the serial port (RS485/RS232) or network.
Mode:
o
Time Interval: The period of sending the command string to 3rd party device.
o
Time Out: The device will stop sending the command string after receiving the answer string
from the 3rd party device.
o
+Ans: The answer string which sends to Terracom device when 3rd party device has received
the command string.
o
+Time Out: Set the ''period time'' to resend the command string when not receiving the
[+Ans] response.
o
+Repeat: Set the ''repeat time'' to resend the command string when not receiving the [+Ans]
response.
Users can send the command using logic/Scheduler to 3rd party devices such as UAP G2, ECS, LAP
G2T etc.
Use logic output to control the 3rd party devices.
Name: The display name of this [Logic Out] action.
