IDA8 Global-Net User Manual
548
© 2017, ATEÏS, member of PAX ProAV Group
Operating temperature:
-5ºC ~ 55ºC (23 ºF ~ 131 ºF)
Storage temperature:
-40 ºC ~ 70 ºC (-40 ºF ~ 158 ºF)
Relative humidity:
15% to 90%.
7.3.2
BPA
Electrical
Mains Power Supply AC Input:
230 VAC ±10%, 50/60 Hz
Power consumption:
Total mains-power consumption @ 230 VAC
Idle: Measured with 10 Volt surveillance
tone on the output.
Standby - idle - full load (per channel)
BPA-2060: 2.5W - 140W
BPA-2120: 2.5W - 11W - 295W
BPA-2240: 2.5W - 11W - 550W
BPA-2480: 2.5W - 13W - 1000W
BPA-1000: 3.0W - 15W - 1000W
Fuse rating:
BPA-2060: 2.5A @ 110 V, 1.25A @ 250 V
BPA-2120: 5 A @ 110 V, 2.5 A @ 250 V
BPA-2240: 8 A @ 110 V, 5 A @ 250 V
BPA-2480: 16 A @ 110 V, 7 A @ 250 V
BPA-1000: 18 A @ 110 V, 9 A @ 250 V
Battery Power supply 48 VDC Input:
48 - 53 VDC
Power consumption:
Alarm cycle + 10 V pilot-tones @ 48 VDC
Standby- idle -full load (per channel)
BPA-2060: 0.09 A - 2.0A
BPA-2120: 0.09 A - 0.16A - 4.07 A
BPA-2240: 0.09 A - 0.23A - 8.13 A
BPA-2480: 0.09 A - 0.23A - 13 A
BPA-1000: 0.12 A - 32 A
Inputs/Outputs
Input
Power inputs:
US type: 115V
EU type: 230V
Line inputs:
2 x (one per channel) for BPA-2XXX units
Connector:
3-pin XLR and 3-pin phoenix(electronically
balanced)
Frequency response:
+/-3 dB @ 50 Hz and 18 kHz
SNR(Signal-to-noise ratio):
86 dB @ 1 kHz at full power
THD(Total harmonic distortion):
< = 1 % @ 1 kHz
Sensitivity:
0.775V @ 10K Balanced
Input range:
-6 dBV to 6 dBV / 770 mV
Input impedance:
22k ohm
Output
