22
9. SETUP:
Use this key to enter the setup menu and view or change the display
contrast, alarm volume, and PLC remote settings.
10. EXIT:
Use this key to exit any menu or to clear an unwanted entry in a parameter
field.
11. ENTER:
Use this key as an ENTER key to accept numeric data for parameter
settings.
12. RETURN OUTPUT TERMINAL:
Connector used to attach the return test lead,
adapter box return lead or test fixture return lead to the instrument. This
connection provides the return current path.
13. HIGH VOLTAGE OUTPUT TERMINAL:
Connector used to attach the high
voltage test lead, adapter box high voltage lead or test fixture high voltage lead to
the instrument. This connection provides the high voltage used during a Hipot test.
14. HIGH VOLTAGE INDICATOR:
This indicator flashes to warn the operator that
high voltage is present at the high voltage output terminal.
3.6.2. Rear Panel Controls
1. CHASSIS GROUND (EARTH) CONNECTION:
This terminal should be connected
to a good earth ground before operation.
2. CALIBRATION BUTTON:
To put the instrument into the calibration mode push
this button and turn on the power switch simultaneously.
3. REMOTE SIGNAL INPUT:
9-Pin D-type subminiature male connector for remote
control of TEST, RESET, and REMOTE INTERLOCK DISABLE functions, as well
as MEMORY SELECTION (See section
6.0. Connection of Remote I/O
for more
detailed information).
Содержание HypotMAX 7705
Страница 6: ......
Страница 14: ...8 cause heart related problems Please have the test operator consult a physician for recommendations ...
Страница 91: ......
