Associated Research HypotMAX 7705, Руководство по эксплуатации и обслуживанию

Страница: 53 / 91

____________________________________________________________________________
47
When running capacitive DUTs the instrument will discharge the DUT at the end of the
Dwell or Ramp-DOWN cycle depending on the test settings. The display will show the
following screen during the discharge cycle:
If the capacitance of the DUT is very small it is possible that you will not see this
display due to the short amount of time required to discharge the DUT.
5.7. BUS Remote Message
The REM indicator will be displayed when the instrument is in the Remote Control
mode. When the BUS Remote is on the instrument is able to send and receive
signals across the GPIB IEEE-488 or USB/RS-232 bus.
5.8. Fatal Error
The only active button or key in this situation is the RESET button. The only reason
the RESET button is active is to allow you to silence the alarm and open the fail relay.
This type of failure permanently locks the instrument in the “Fatal Error” mode and
requires that the instrument be serviced by Associated Research. The customer
should contact Associated Research, Inc to receive further instruction. An example of
the Fatal Error screen appears as follows: