Associated Research HypotMAX 7705, Руководство по эксплуатации и обслуживанию

Страница: 42 / 91

36
setting automatically. The unit is “second” and 0.1 second per step. The display will
show the elapsed time during the testing.
Press the EXIT key to exit from the setting mode to the operation mode if all
parameters have been set.
If the Dwell Time is set to “0”, the timer will continue to count to the maximum test time
then reset to “0” and start over automatically. The test will continue until a reset is
executed or a failure occurs.
4.6.7. Ramp-DOWN Time setting
Advance the menu to the Ramp-DOWN time parameter. The display will show:
Use the Numeric keys to enter the Ramp-DOWN time setting, then press the ENTER
key. The program will store the Ramp-DOWN time setting and advance to the
Frequency Selection automatically.
Press the EXIT key to exit from the setting mode to the operation mode if all
parameters have been set.
4.6.8. Frequency Selection (AC units only)
Advance the menu to the Frequency parameter and the display will show:
Use the ENTER key to select the Output Frequency, then press the
∧
or
∨
key to
advance to another test parameter or press the EXIT key to exit from the setting mode
to the operation mode.
4.6.9. Arc Detect and Arc Sensitivity Selection
Advance the menu to the Arc Detection selection. The display will show: