Associated Research HypotMAX 7705, Руководство по эксплуатации и обслуживанию

Страница: 73 / 91

____________________________________________________________________________
67
Auto Print
Please press the SETUP key to enter the Setup menu. Press the SETUP key six
more times to scroll to the Auto Print selection the screen will show:
To configure Autoprinting press the ENTER key to change the selection. When Auto
Print = ON the printer output will generate data every time the test has completed, and
will also enable two other menus to configure the Print Mode and the Print Number.
When Auto Print = OFF the user must press the EXIT/PRINT key on the lower center
section of the keypad to generate printer output.
When the EXIT/PRINT key is pressed after the test is completed the printer output will
be a duplicate of the front panel LCD test results. This key should only be used to
retrieve test results after the test has been completed. Although the output will print
the LCD screen during a test, the actual elapsed test time may be effected when
printing while the test is active.
Print Mode
Please press the SETUP key. This menu selection works in conjunction with Auto
Print. The Print Mode screen appears as follows:
The printer output will generate the 40 character LCD display test results when the
test is complete. This selection will determine when the 40-character output will print.
When Print Mode = All the printer output will print the test results from every test
performed. When Print Mode = Fail only the test that have failed will be printed. The
Print Number or Serial number will print for every test, followed by the appropriate test
results depending on the Print Mode that has been selected.