Arcteq AQ-F210, Инструкция по эксплуатации

Страница: 20 / 292

Instruction manual –AQ F210 Feeder Protection IED 20 (292
)
C
ONTROLS
E
NABLED

Activation of different control functions is
done in Controls Enabled –sub menu. Each
control function is disabled as standard.
Active functions will appear below Control
Functions –sub menu.

Activated objects will appear below Objects –
sub menu. Each object is disabled as
standard.
Figure 3.2.2.3-15 AQ-200 series IED Controls Enabled sub- menu.
S
ETTING
G
ROUPS

Active setting group displays the current
active setting group 1…8.
 It is possible to activate desired setting group
by setting the force SG. While doing this
Force SG change has to be enabled.

In Used setting groups menus it is possible
to activate setting groups between 1 and
1…8 (default only 1 group is active).
 Select local control for different setting
groups from SG Local Select. Digital inputs,
Logical inputs or outputs, stage starting-
tripping- or blocking, RTDs and object status
information can be used.
 Event masking for setting groups (masks are
off as default). Only masked events appear
to event list. Events cannot be cleared.
Figure 3.2.2.3-16 Setting Groups menu displays all the information related to group
changing.
Setting group 1 has the highest and group 8 the lowest priority. Setting groups can be
controlled with steady signal or pulses.