Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Страница: 34 / 84

User’s Manual
24
LAN
Figure 34 ─ LAN setup screen
y
Type : Choose the type of network configuration from: Manual , DHCP and ADSL (with PPPoE) .
–
Manual : Select to set up LAN parameters manually. Adjust the numbers of the IP Address ,
Gateway and Subnet Mask by using the arrow buttons.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your
network administrator.
The factory default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet
Mask: 255.255.255.0
–
DHCP : Select if the DVR is configured by DHCP (Dynamic Host Configuration Protocol) network.
Selecting Save reads the current IP address of the DVR.
–
ADSL : Select if the DVR is configured by ADSL network. Enter the ID and password for ADSL
connection by using a virtual keyboard. Selecting Save reads the current IP address of the DVR.
NOTE: ADSL and modem cannot be configured at the same time. If the DVR is configured by
modem, the
ADSL (with PPPoE) will not be selected.
NOTE: If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might
change whenever the unit is turned on.
y
DNS Server : Set the IP address of the DNS server. If you set up the DNS Server, the domain name of
the DVRNS server instead of the IP address can be used during the DVRNS Server setup. (Refer to the
DVRNS Setup section for details of DVRNS function.)
NOTE: If the DVR is configured for DHCP or an ADSL network, you will need to get the IP Address
of the DNS Server from the internet service provider to use DVRNS function. (Refer to the
DVRNS
Setup section for details of DVRNS function.)
y
Port Number Setup… : Select to set up port numbers and the Port Number Setup screen appears.