Mobile Digital Video Recorder
35
NOTE: The GPS cannot be configured if the RS232 port and RS485 port are in use for PTZ control,
networking, text input or remote keyboard.
y
Enable Recording
: Select to record images with GPS information.
y
Use GPS Time Sync.
: Select to synchronize the time to the GPS satellite in the interval of 1 hour.
y
Speed Unit:
Select the unit of measure for the display speed between
km/h
and
mph
when displaying
GPS speed on the screen.
Selecting
Save
displays the GPS information box on the screen while the GPS
receiver receives satellite data. You can change the position of GPS information
box by clicking the bar on the top of the box and dragging it to where you want it
located on the screen.
Recording Settings
Your DVR offers a variety of flexible recording modes. You can set it up to record all the time or to only
record events. It can be set up to continue recording once the hard disk drive is full by recording over the
oldest video, or you can set it up to alert you when the hard disk is full and stop recording.
Figure 54
─
Record menu
Record Setup
Select
Record
in the Record menu, and the Record setup screen appears.
Figure 55
─
Record setup screen
y
Recycle
: Select to
record over the oldest video data once all available storage space has been used.
When it is not selected, the DVR stops recording once all available storage space has been used.
y
Resolution:
Choose the recording resolution from
High
and
Standard
. All other variables being
equal; Selecting High resolution will decrease the recording and playback speed by half that of
Standard resolution.
Содержание RoadRunner MR2B Series
