Mobile Digital Video Recorder
41
y
Zone
: Define the area of the image where you want to detect motion; e.g., a doorway, and the Motion
Detection Zone screen appears.
You can select or clear eight individual blocks in a group at a time. Click the right mouse button on the
screen and the following menu screen appears.
Figure 67
─
Motion Detection Zone menu
y
Min. Blocks
: Adjust the minimum number of detection blocks that must be activated to trigger a
motion alarm. Adjust the minimum number of detection blocks for Daytime and Nighttime
independently.
y
Zone View
: Select to observe how the DVR is reacting to motion. When in the motion viewing mode,
any detected motion within the zone will be displayed in red.
y
Motion Ignoring Interval
: Adjust the motion ignoring dwell time. The DVR will not log and notify
motion events occurred during the preset interval range. You can control excessive event logging and
remote notification of motions detected after the motion dwell time by adjusting the motion ignoring
dwell intervals.
NOTE: The record action for motion events will not be affected by the Motion Ignoring function.
y
Daytime Setup
: Select to display the Daytime Setup screen.
The
Motion Detection Zone
screen is laid over the video for
the selected camera. You can select or clear a block by clicking
the mouse button to set up motion detection zones.
Figure 66
─
Motion Detection Zone screen
–
Select:
Activate selected blocks to detect motion.
–
Clear:
Deactivate selected blocks so that they will not detect motion.
–
Reverse:
Activate inactive selected blocks and deactivates active highlighted blocks.
–
Select All:
Activate all blocks to detect motion.
–
Clear All:
Deactivate all blocks so that they will not detect motion.
–
Reverse All:
Activate inactive blocks and deactivates active blocks.
–
OK:
Accept changes and closes Zone setup.
–
Cancel:
Exit Zone setup without saving changes.
Select
Daytime
and
Nighttime
, and choose the sensitivity. Smaller
numbers provide greater sensitivity because fewer detection blocks must
be activated.
Figure 68
─
Motion Detection Min. Blocks screen
–
Daytime
: Set the Daytime range. The DVR will consider the
remaining time range as the Nighttime.
Figure 69
─
Daytime Setup screen
Содержание RoadRunner MR2B Series
