Apollo RoadRunner MR2B Series Скачать руководство пользователя

Страница: 76 / 84

User’s Manual

Appendix B

─

USB Hard Disk Drive Preparation

Preparing the USB-IDE hard disk drive in Windows 2000

NOTE: Preparing a USB-IDE hard disk drive under Windows XP is almost identical to Windows 2000.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer.

The USB device icon should display on the Taskbar.

If the USB-IDE hard disk drive is partitioned or has data, it will show up in

My Computer

a hard disk drive icon. Check the file system by right clicking on the icon and checking under

Properties

General

File System.

If the file system is NOT FAT32 format, format the

USB-IDE hard disk drive using the FAT32 format.

If the USB-IDE hard disk drive is not partitioned, go to

Administrative Tools

Control

Panel

and launch

Computer Management.

Open

Disk Management

Storage

and right

click an unallocated region of the USB-IDE hard disk drive. Then, click

Create Partition.

In the

Create Partition wizard

, click

Next

then

Primary Partition

, and follow the instructions

on the screen. Make sure that the FAT32 is selected for the file system.

NOTE: The partition size should be less than 32GB because of Microsoft limitations.

After formatting is complete, the USB-IDE hard disk drive will be added to

My Computer

7. Connect the USB-IDE hard disk drive to the DVR.

Preparing the USB-IDE hard disk drive in Windows 98

NOTE: Preparing a USB-IDE hard disk drive under Windows ME is almost identical to Windows 98.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer. The

Add New Hardware wizard

window will appear.

Install the device driver for the USB backup device following the instructions provided with
your USB hard disk drive.

If the USB-IDE hard disk drive is partitioned or contains data, it will show up in

Computer

as a hard disk drive icon. Check the file system in

Properties

General

File

System.

If the file system is NOT FAT32 format, format the USB-IDE hard disk drive with

FAT32 format.

Run the FDISK utility by clicking

Start

then

RUN

. Type “fdisk” and click OK.

When the MS-DOS command prompt appears, type “Y” and hit the enter key.

In the FDISK Option menu, choose

“5. Change current fixed disk drive.”

Choose the appropriate letter corresponding to the USB-IDE hard disk drive.

In the FDISK Option menu, choose

“1. Create DOS partition or Logical DOS Drive.”

10.

In the Create DOS Partition or Logical DOS Drive menu, choose

“1. Create Primary DOS

Partition.”

And Type “Y” to use all available space and hit the enter key. Hit ESC to exit the

screen after the USB-IDE hard disk drive partition is created.

11.

Restart your computer and verify the newly created drive is in

My Computer

12.

Right click the newly created hard disk drive icon and select

“Format”

13.

In the Format Screen, select

“Full”

as the

“Format type”

and click

“Start”

14. After formatting is complete, connect the USB-IDE hard disk drive to the DVR.

Содержание RoadRunner MR2B Series





















































































Результаты поиска

Содержание RoadRunner MR2B Series

Отзывы:

Похожие инструкции для RoadRunner MR2B Series

Бренды по названию

Популярные бренды

Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Результаты поиска

Содержание RoadRunner MR2B Series

Отзывы:

Похожие инструкции для RoadRunner MR2B Series

Бренды по названию

Популярные бренды