Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Страница: 21 / 84

Mobile Digital Video Recorder
11
Chapter 3 ─ Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 ─
Installation .
Front Panel Controls
Figure 7 ─ DVR front panel
Power Switch : The unit can be turned on or off with the key provided with the unit.
HDD LED : The LED flickers when the DVR is recording or searching video on the hard disk drive.
POWER LED
: The LED is lit when the unit is On.
USB Ports : They are provided to connect a USB mouse for controlling the unit and external hard disk,
CD-RW or flash drives for video clip copying or system upgrade. A USB to Serial converter also can
be connected to the USB port to use multiple text-in devices. Position external drives close enough to
the DVR so that you can make the cable connections, usually less than 6 feet. Use the USB cable
provided with the hard disk drive to connect it to the DVR.
Removable HDD : The hard disk drive can be removed to view the video on the personal computer or
on another DVR. Remove the hard disk drive after the unit turns off. The Power Switch must be in the
Off position to remove the drive. Refer to the
Appendix E – Playback on PC with USB Interface for
details of playing back images on the personal computer.
Standard DCP Controls
y
ALARM1 : The LED flickers when the alarm output 1 is active.
y
ALARM2 : The LED flickers when the alarm output 2 is active.
y
ALARM RESET:
Pressing the button does multiple functions as follows:
–
It resets the outputs during an alarm.
–
It displays the event log when you are in the live monitoring mode unless
there is an active alarm.
y
PANIC : Pressing the button starts panic recording of all camera channels,
and displays on the screen. Pressing the button again will stop panic
recording.
Figure 8
─ Standard DCP